| |
Enamelled
Round & Rectangular Copper Wire. - SOLDERABLE
POLYURETHANE ENAMELED ROUND
COPPER WIRE CLASS 130 |
| Specifications |
I
S: 13730 Part: 4
|
I
E C: 317 - Part-4 |
N
E M A MW 1000 75 - C |
| Size
Range |
0.100
- 0.800 mm
|
| Safe
Working |
42
- 21 SWG |
| Covering
|
Grade:
1, Grade: 2 (Single, Heavy) |
| Application |
BIC
Solderable polyurethane Coated Wires are suitable for
all "B" Class applications have widely used in coils and
motor windings where severe overloads are not experienced
and where solderability is important. Small motors, Relay,
Electronic Coils, Timer and clock coils, Ignition coils,
low voltage transformer and solenoids, TV. Deflection
coils. |
| Limitation |
Solderable
Polyurethane coated wires are not recommended where severe
over loads are experienced. |
|
| |
| BIC
Solderable polyurethane is polyurethane base insulation
enamel, which allows conductor soldering without prior
removal of the film from the wire. BIC Solderable polyurethane
coated wires have good elongation and low spring back
making them suitable for high speed winding machines.
apart from manual and semi automatic machines. BIC Solderable
Polyurethane coated Wires have very good chemical resistance
and compatible with all general purpose impregnating varnishes
and other which do not the reactive solvent. |
|
Enamelled
Round & Rectangular Copper Wire. - BIC
SOLDERABLE POLYURETHANE COATED WIRES
CLASS 130 ( 0.50 mm Dia. Grade:1 ) |
| Properties |
As
per I E C |
Typical
BIC value |
| Elongation |
Min:
26% |
35% |
| Heat
shock |
155oC
-˝hr-2xd- no crack |
155oC
-˝hr-1xd-no crack |
| Cut
through |
170oC
for 2 Min- shall pass |
passes
- 200oC for 2 Min |
| Dielectric
Dissipation Factor |
(Tan
Delta) 1MHz-Max: 0.030 |
1
MHz-Max:0.025 |
|
| |
